Benro S6PRO Video Head

S6PRO

The S6PRO Video Head comes with a slide in QR6 plate & a fixed fluid cartridge balance, giving this plenty of flexibility.

Featuring a 65mm flat base with a 3/8"-16 threaded hole, the Benro S6PRO Fluid Video Head can efficiently be moved between compatible tripods and sliders, jibs, monopods, and other support gear.

• 3/8"-16 threaded hole
• Supports up to 6kg loads and offers 5+0 steps of counterbalance and continuous pan and tilt drag
• Tilt range is a wide +90/-75°, and the pan range is a full 360°
• Two camera screws are supplied, 1/4"-20 and 3/8"-16
• 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms

The Benro S6PRO Fluid Video Head supports up to 6kg loads and offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left or right handed users.

A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much.

Two camera screws are supplied - 1/4"-20 and 3/8"-16 - that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

The Benro S6PRO Video Head comes with a full Australian warranty from Benro Australia.