Wimberley P-35 Lens Plate

The P-35 is a 5.0” long, double dovetail, Arca-Swiss style quickrelease plate. It is used to connect a camera lens, fitted with both a rotation collar and tripod mounting foot, to a compatible quick-release clamp. Wimberley plates are compatible with most Arca-Swiss style quick-release clamps, such as those made by Wimberley, Really Right Stuff, Kirk Enterprises, Markins, Arca-Swiss, Foba, Graf and others.

Positioning the plate on your lens: The plate position can be adjusted on the lens foot to suit your needs. It can be positioned either facing forward or facing backward. The plate’s elongated center slot allows you to adjust the back and forth position of the plate on the lens foot while the screws are still engaged. Loosen the screws just enough to free up the plate then position the plate so that you: 1) Are able to balance the lens in all scenarios (e.g. with teleconverters, flash brackets, different camera bodies, etc.) 2) Have enough plate contained within the clamp for a secure mount.

If your lens foot has only one mounting hole, the two extra safety stop screws included with your plate can be used to prevent the plate from twisting on the lens foot. Thread the small screws into the two counter-bored holes in the plate, so that the screw ends protrude from the top of the plate (the side you attach to your lens foot). When installed in this fashion they provide a set of anti-twist nubs that can be seated flush against the front or back of your lens foot to prevent rotation.

Wimberley P-35 Lens Plate comes with a full Australian warranty.